Changeover Switches
Manual and motorised changeover switches for transfer between two supplies, such as mains and generator.
On request- StandardIEC 60947-3, IEC 60947-6-1

Download specification sheet (PDF)
AC and DC contactors for switching motors and other loads, with auxiliary contacts and coil options.
Every field is optional - tell us what you know and we will confirm the rest in the quotation.
Representative image. The actual product, make and appearance depend on the supplier and your specification.
Also searched as: power contactor, electrical contactor, AC contactor, motor contactor, magnetic contactor, 3 pole contactor
Choose the contactor by utilisation category, not just by current. AC-3 describes starting and stopping squirrel-cage motors, AC-1 is for resistive loads such as heaters, and AC-4 covers plugging and inching duty, which is much harder on the contacts. The same frame has a lower current rating in AC-4 than in AC-3.
Common mistakes are selecting by kW only, ignoring contact life under frequent starts, and fitting no suppressor across DC coils. Pair with a thermal overload relay and use the switching and control devices range for the rest of the starter.
Ratings, dimensions and certification are confirmed against your enquiry. Use Send an enquiry and our engineers will respond within 24 hours.
AC-3 is the utilisation category for starting and stopping squirrel-cage induction motors. The kW or ampere rating at AC-3 is the one to compare for motor starters. Other categories, such as AC-1 or AC-4, have different current ratings.
Standard contactors can weld or wear out quickly because of the high inrush current when a capacitor is switched in. Use contactors designed for capacitor duty, or add inrush-limiting resistors or reactors, as the contactor manufacturer advises for your bank.
A power contactor is an electrically operated switch. When its coil is energised, the main contacts close and carry the load current. It is used to switch motors and other loads, commonly in DOL and star-delta starters.
A power contactor has main contacts rated to carry the load current of a motor or other load. An auxiliary or control contactor has small-current contacts used in control circuits for signalling, interlocking and switching other coils.
Select by the motor rated current and the utilisation category, AC-3 for squirrel cage motors. Then check the coil voltage, number of poles and auxiliary contacts needed. A contactor does not protect the motor, so add an overload relay and short-circuit protection.
SKE Bharat is a supplier based in Rajaji Nagar, Bangalore, supplying across India. Quotations are prepared from the ratings you send: motor kW or current, coil voltage, number of poles and preferred make. Quotation within 24 hours.
| Product Type | Contactor |
|---|---|
| Standard | IEC 60947-4-1 |
| Selection Basis | Rated current (AC-3 / AC-1), coil voltage, number of poles, auxiliary contacts |
| Typical Use | Motor starters and load switching |