17.5 to 33 KV HT Panels
Indoor HT switchgear panels for 17.5 kV to 33 kV class distribution.
- StandardIEC 62271-200
- Voltage Class17.5 kV - 33 kV
Browse the full range. Filter by category or feature, compare specifications and add items to your quote list.
Indoor HT switchgear panels for 17.5 kV to 33 kV class distribution.
Metal-enclosed medium-voltage switchgear for motor starting and distribution from 3.3 kV to 11 kV.
Low-voltage panels rated for 800 V class solar and inverter duty.
Boxes that combine several inverter AC outputs into a single feeder with protection.
AC-side distribution boards that gather inverter outputs and connect them to the plant LV supply.
Air circuit breakers for main incomers and bus-couplers of LT switchboards at high current ratings.
Auto Mains Failure panels that start the generator and transfer the load automatically when mains power fails.
Ammeters, voltmeters, frequency meters and other panel indicators.
Automatic power-factor controllers and detuning reactors used in APFC panels.
Automatic Power Factor Correction panels that switch capacitor banks to hold power factor near unity and avoid utility...
Weatherproof boxes in the array field that combine PV strings with fuses and surge protection.
Panels that transfer the load between two sources automatically with electrical and mechanical interlocking.
Float-and-boost chargers and DC power supplies for stationary battery banks.
Racks, stands and interconnecting cables for battery banks.
Right-angle gearboxes combining bevel and helical stages for heavy-duty conveying and mixing.
Multistage submersible pumps built to run inside narrow borewells for deep-water lifting.
Sandwich and air-insulated busway systems carrying heavy current between transformers and panels with low losses.
Cutters and strippers for cutting cable and removing insulation cleanly without damaging the conductor.
Crimp lugs and cable glands for terminating power and control cables.
Perforated, ladder and wire-mesh trays with bends, tees and supports.
General-purpose centrifugal pumps for transferring clean water and light liquids in industry and buildings.
Manual and motorised changeover switches for transfer between two supplies, such as mains and generator.
Pumps in chemical-resistant materials for transferring acids, alkalis, solvents and other aggressive liquids.
Totally enclosed squirrel-cage induction motors - the general-purpose workhorse for dusty and outdoor industrial duty.
Packaged compact substations that combine the HT switchgear, transformer and LT panel in one factory-assembled enclosure.
Multicore cables for control, interlock and signal wiring between panels, drives and field devices.
Interface relays, timers and monitoring relays for control and automation circuits.
Vertical motors for cooling-tower fans, built to run reliably in constant moisture and temperature swings.
Crane-duty motors with an integral fail-safe brake for hoists and travel drives.
Slip-ring crane and hoist motors built for intermittent duty with frequent starts, reversals and braking.
Hand and hydraulic crimping tools for fitting lugs, ferrules and connectors to cables.
Current transformers that step down primary current for meters and protection relays.
DC-side boards that combine string inputs with protection before the inverter.
Thyristor DC drives for speed control of DC motors in rolling mills, cranes and process lines.
24 V DC and other DIN-rail switch-mode power supplies for control panels and automation.
Oil-filled distribution transformers that step grid voltage down to the utilisation level for plants, campuses and utilities.
Motor control centres with withdrawable feeder modules for fast replacement without shutting down the bus.
Spares for drive and control panels: contactors, relays, fuses, power supplies, fans and control components.
Air-cooled dry-type transformers with no oil, for indoor locations where fire safety matters.
Earthing electrodes, strips, earth pits and accessories for earthing and lightning protection.
Extra-high-voltage power transformers for transmission substations and large generating stations.
Enclosures for cable terminations, branching and instrument signals in plant and field installations.
End-suction centrifugal pumps of the CE series for water supply and process duties.
End-suction centrifugal pumps of the CPHM series for water transfer and general service.
End-suction centrifugal pumps in the DB and DB Large series for water transfer and general industrial service.
Mixed-flow end-suction pumps that move large volumes at low to medium head.
Monoblock end-suction pumps in which the impeller mounts directly on the motor shaft, for compact installations.
End-suction process pumps of the KPD series for industrial process liquids.
Single- and three-phase energy meters for billing and sub-metering of consumption.
On-grid solar string inverters for residential, commercial and industrial rooftop plants; single phase 2-5 kW and three phase...
Off-grid MPPT solar power conditioning unit with priority power sharing so solar is used first and grid use...
Sealed, maintenance-free AGM VRLA solar batteries (12 V monoblocs and 2 V cells) built for cyclic duty and...
Longer-life version of the 6EL range with low-antimony alloy and ceramic vent plugs, stated float life beyond 5...
12 V flooded tubular monoblocs made with Exide's high-pressure (100 bar) Torr tubular spine casting for UPS, telecom...
Tubular gel VRLA 2 V cells in stackable 8 V modules for telecom BTS on-grid and off-grid sites;...
Maintenance-free calcium-calcium starter batteries sized for different genset ratings.
DSP-based pure sine wave home UPS ('Grid Quality Power') with a 100% copper transformer and 3-stage intelligent ASIC...
Low-maintenance tubular inverter battery with PLEX technology and fast recharge, rated for up to 800 cycles at 80%...
Standard-range tubular inverter battery for everyday home backup, built for deep discharge with up to 1,000 cycles at...
Premium tubular range with thicker plates and extra electrolyte per Ah, rated for up to 1,200 cycles at...
DSP and microcontroller-based home UPS with intelligent ASIC charging, fan-assisted cooling and under-10 ms changeover
Microcontroller-based pure sine wave home UPS with a wide 90-300 V AC input range for low-voltage areas.
Compact short-container versions of the InvaMaster deep-discharge tubular battery, for places where a tall battery will not fit.
DSP-based higher-capacity UPS for offices, shops and motor loads, 2 to 12 kVA with 24 V to 192...
Compact pure sine wave home UPS (inverter) in 650 VA and 850 VA ratings for homes and small...
Traction batteries for electric forklifts, golf carts, mining locomotives and electric vehicles: HSP Classic and Gen-X flooded ranges,...
Low-maintenance tubular cells in PP / transparent SAN containers for power, substation and UPS standby duty.
Plante-type 2 V standby cells in transparent SAN containers (99.99% pure lead positive plate) with service life above...
Front-access, high-power-density AGM VRLA batteries for 19-inch and 23-inch rack or cabinet installation in data centres.
Top-terminal extra-high-power-density AGM VRLA batteries for data-centre UPS strings.
Sealed maintenance-free AGM VRLA batteries for UPS and power applications, 12 V in a wide capacity range.
Batteries approved by RDSO for Indian Railways: low-maintenance tubular signalling cells, LMX and MET1100 VRLA for coach lighting/AC,...
Pure sine wave solar hybrid UPS / PCU with built-in PWM solar charge controller and grid/solar/battery priority settings,...
High cycle-life 12 V flooded tubular solar battery for off-grid storage.
Maintenance-free tubular gel VRLA solar batteries in 12 V monoblocs and 2 V cells assembled in modules.
Low-maintenance flooded tubular 12 V monoblocs for regular deep-cycle solar duty, factory filled and charged.
Low-maintenance flooded tubular 2 V cells (300-1000 Ah) for larger off-grid and hybrid solar plants.
Transparent-container tubular 2 V standby cells with about 15-year service life for power plants, substations, telecom and UPS;...
Antimony-free AGM VRLA 2 V cells for telecom exchanges and towers, 200-6000 Ah, 20-year design life at 27...
High-discharge tubular cells in transparent SAN containers, 100-2200 Ah, about 15-year float life.
Outdoor distribution pillars that branch cable feeders from a supply point to loads.
Fire-pump sets for hydrant and sprinkler systems, supplied as electric, diesel or jockey units.
Flameproof motors fitted with a flameproof brake, for hoisting and holding duties in hazardous areas.
Flameproof (Ex d) motors that contain an internal explosion and prevent ignition of a surrounding hazardous atmosphere.
Industrial pump of the FTMP series. Share your duty details and we will confirm the correct model and...
Heavy-duty transformers designed for arc and induction furnaces, delivering very high secondary current with frequent load swings.
Geared motor with a built-in electromagnetic holding brake, for positioning and fail-safe stopping of conveyors and lifts.
Positive-displacement gear pumps that deliver a steady flow of viscous liquids such as oils and lubricants.
Helical gearboxes for smooth, quiet, high-load power transmission in industrial drives.
High-voltage AC induction motors for large, continuous-duty industrial drives such as fans, pumps, compressors and mills.
Touch and keypad operator panels for monitoring and controlling machines and processes.
Axially split-casing pumps of the DSM series for large-capacity transfer and circulation.
Axially split-casing pumps of the UP series for large flows, with easy access to the rotating parts.
Horizontal multistage pumps of the RKB series for high-head duties such as boiler feed and pressure boosting.
High-rupturing-capacity fuse links, fuse bases and fuse switch units for short-circuit protection.
Power cables for carrying electricity from supply to loads, in LT and HT grades with copper or aluminium...
Industrial network switches and protocol gateways for plant communication.
Inline helical gear units with coaxial input and output for compact installations.
Twisted-pair and triad cables with screening for low-level instrument signals and process control loops.
Insulating rubber gloves that protect the wearer from electric shock when working on or near live equipment.
Networked motor control centres with intelligent relays and communication for monitoring and automation.
Load-break switches and isolators for safe isolation of circuits and equipment.
DC motors with a laminated yoke for thyristor-converter fed drives, giving fast response and a wide speed range.
Distribution boards that feed and protect lighting and small-power circuits.
General low-voltage switchboards for incoming, bus-coupler and outgoing feeders.
Miniature circuit breakers for overload and short-circuit protection of final circuits in distribution boards.
Fixed-type motor control centres that group starters for several motors in one assembly.
Moulded-case circuit breakers for feeder and motor-circuit protection from tens to a few thousand amperes.
Medium-voltage switchgear for plant incomers, feeders and HV motors.
Medium-voltage solid-state soft starters for smooth acceleration of large HV motors.
Panels housing energy meters, CTs and test blocks for tariff and sub-metering.
Inverter/UPS aimed at running both IT and home loads, 1500 VA 12 V pure sine wave, with LED...
Home inverter range with energy-saving technology, offered in Advanced Digital Wave and Pure Sine Wave versions (12 V...
Grid-tied solar inverters (1 kW and 5 kW) with MPPT, WiFi/RS485 monitoring.
Three-phase grid-tied solar inverters from 8.8 kW to 250 kW.
Higher-capacity home inverters (12 V and 24 V) for heavier household loads, in Pure Sine Wave and Digital...
IGBT-based high-grade Jumbo UPS at the top of the Jumbo range (96 V system).
Wall-mounted pure sine wave inverter with a built-in lithium-ion battery in a single unit; WiFi monitoring on the...
Entry-level home inverter range in Advanced Digital Wave and Pure Sine Wave versions.
Luxe inverter bundled with a Microtek tubular battery
High-capacity pure sine wave Jumbo UPS (24 V to 72 V systems) for heavy home and commercial loads...
Compact Microtek home inverter/UPS range in 12 V and 24 V pure sine wave versions, with LCD display,...
Pure sine wave inverter with WiFi connectivity for monitoring; listed as the 1400 (12 V, 1100 VA) inverter...
Pure sine wave home UPS/inverter range (12 V and 24 V) positioned for a mix of home and...
MPPT-type solar power conditioning units from 3.5 kVA up to 10 kVA class (48 V to 120 V...
Higher-end PWM solar power conditioning units in 24 V and 48 V.
PWM solar PCUs in 12 V, 24 V and 48 V systems that combine inverter, charger and solar...
New-generation high-capacity pure sine wave Sumo UPS (24 V to 72 V systems) for commercial and heavy loads.
Popular Microtek home inverter range offered in both Pure Sine Wave and Advanced Digital Wave versions, 12 V...
Newest high-power home inverter series in 12 V and 24 V with Pure Sine Wave (SW) and Pure...
Heavy-duty DC motors for rolling-mill and metals applications with high overload and shock capability.
Spares for electric motors: bearings, shafts, fans, terminal boxes, slip rings, brushes and windings.
On requestPanel meters that show voltage, current, power, power factor, frequency, energy and harmonics.
Resistor panels that limit earth-fault current at the transformer or generator neutral.
Nickel-cadmium batteries for harsh environments and long, dependable standby service.
Self-priming pumps with a non-clog impeller for liquids containing solids and fibres.
Non-sparking (Ex nA) motors for Zone 2 areas where a hazardous atmosphere is unlikely in normal operation.
Control panel built to your drawing for the NVR requirement of the installation.
Oil-immersed transformers in a range of ratings for industrial and utility service.
Open (drip-proof) squirrel-cage induction motors for clean, well-ventilated indoor installations.
Submersible pump sets for open wells, sumps and reservoirs, with the motor sealed and submerged with the pump.
Parallel-shaft helical gearboxes for high-torque industrial duty.
Power control centres - the main LV switchboard fed from the transformer, distributing power to MCCs and large...
Planetary gearboxes with high torque density and efficiency in a compact, coaxial package.
Programmable controllers that run machine and process logic, with digital, analogue and communication I/O.
Voltage transformers for metering and protection at medium and high voltage.
LT power capacitors for power-factor correction, in cylindrical and box constructions.
AC and DC contactors for switching motors and other loads, with auxiliary contacts and coil options.
Distribution boards for sub-distribution of power to machines and sections.
Power transformers for step-up and step-down duty in substations and generation plants.
Field transmitters that convert process variables to 4-20 mA or digital signals.
Numerical and electromechanical protection relays for feeders, motors, generators and transformers.
Sensors that detect presence, position and limits for machine and conveyor automation.
Pilot devices for panel doors and control stations: push buttons, indicator lamps, selector switches and emergency stops.
Residual-current devices that trip on earth leakage to protect people and equipment; RCBOs add overcurrent protection in the...
Rack-mount 48 V LiFePO4 modules for telecom towers, remote sites, data nodes and UPS setups
Conventional home pure-sine-wave UPS inverters that run on an external battery; listed on the website under Home Solutions...
Compact wall-mount all-in-one inverter-plus-LiFePO4 battery units for homes, offices and clinics; the website markets them as 'Energy Storage...
Wall-mountable LiFePO4 battery banks that replace lead-acid batteries behind any inverter, in voltages from 12.8 V to 120...
Floor-standing modular LiFePO4 battery stacks built from 51.2 V / 100 Ah / 5.12 kWh modules, scalable from...
Small 12.8 V lithium-ion packs for street lights, solar fans and residential panels; the website lists five sizes...
Pure-sine-wave solar PCUs with MPPT charge control that manage solar, battery and grid power for homes and small...
Protection, control and timing relays for motors, feeders, transformers and generators.
Distributed input/output modules that extend a controller across the plant over a fieldbus or Ethernet.
Heavy-duty AC motors for rerolling-mill stands and auxiliaries, designed for frequent starts, shock loads and high peak torque.
Cast-resin dry transformers with windings encapsulated in epoxy resin for moist, dusty or fire-sensitive locations.
Rugged motors for roller-table drives in steel mills, built for frequent reversing, high torque and hot, dusty surroundings.
Industrial safety helmets and related personal protective equipment for site and plant work.
Electronic starters that ramp motor voltage for smooth starting and reduced mechanical and electrical stress.
Combined AC and DC distribution boards that protect and isolate the DC input and AC output of a...
Crystalline-silicon photovoltaic modules for rooftop, ground-mount and utility plants.
Solid-handling non-clog pumps of the SHM / SHD series for liquids with large solids, slurries and sludge.
Non-clog pumps of the SHL series for liquids with fibrous or solid content.
Solid-yoke DC motors for general industrial duty on DC supply, simple and robust.
Submersible non-clog pumps of the NS series for sewage, sludge and drainage.
Auxiliary equipment for substations: isolators, CTs, PTs, LAs, earthing and control items.
Spares for substation equipment: isolators, CT / PT parts, lightning arresters, fuses and breaker components.
Surge protective devices that divert lightning and switching surges away from equipment.
Spares for low-voltage switchgear: breakers, contactors, trip units, auxiliaries, busbar parts and indicating devices.
Spares for medium-voltage switchgear: vacuum interrupters, breaker mechanisms, coils, relays and auxiliaries.
Panels that match voltage, frequency and phase so generators or sources can be paralleled safely.
Overload relays and motor protection circuit breakers that protect motors against overload and phase loss.
Metering and monitoring panel built to your drawing for the TVM requirement of the installation.
Industrial pump of the Type HG series. Share your duty details and we will confirm the correct model...
Rack-mount version of the Greenline single-phase online UPS for server rooms and racks, in 6 and 10 kVA...
Single-phase true online double-conversion tower UPS from 1 to 10 kVA with a built-in static bypass, aimed at...
UPS systems from Uniline with lithium-ion batteries, which the company describes as more compact, with longer backup time...
Heavy-duty IGBT online UPS in a floor-standing cabinet for 3 to 80 kVA, listed on the website without...
Single-phase IGBT online UPS from 1 to 15 kVA with an isolation transformer and pure sine wave output,...
IGBT online UPS with batteries built into the cabinet, offered from 3 to 10 kVA on the website...
Online UPS range designed to run elevators and lifts through power failures, from 3 to 80 kVA, with...
Heavy-duty three-phase in, three-phase out IGBT online UPS from 3 to 80 kVA with a built-in isolation transformer...
Modular, hot-swappable three-phase online UPS for mission-critical sites such as data centres, with 30 kVA power modules scaling...
Residential pure sine wave inverters from 0.6 to 2.5 kVA that run on 12 V or 24 V...
Line-interactive sine-wave UPS from 0.5 to 3 kVA, with fast charging and electronic shutdown protections.
Compact line-interactive standby UPS with a single-transformer design for PCs, peripherals and small office or biomedical loads.
Off-grid single-phase solar power conditioning unit with MPPT charge controller and grid charger, 7.5 kVA at 96 V...
Three-phase in, three-phase out double-conversion online UPS from 10 to 300 kVA with DSP control, intended for IT,...
Vacuum pumps that remove air or gas to create negative pressure for process and priming duties.
Industrial valves for isolating, regulating and protecting pipelines: gate, globe, ball, butterfly and check types.
AC drives that control the speed of induction motors for process control and energy saving.
Vacuum circuit breakers for medium-voltage switchgear, switching motors, transformers and feeders.
Vertical hollow-shaft motors that couple directly to vertical turbine and deep-well pumps, with a non-reverse ratchet where required.
Vertical multistage pumps with in-line suction and delivery for pressure boosting and high-head transfer.
Vertical turbine pumps for lifting water from wells, sumps and tanks, with the bowl assembly submerged.
Panels housing variable-frequency drives or soft starters with the associated protection and control.
Spares for variable-frequency drives: power modules, capacitors, cooling fans, control cards and keypads.
Vacuum-pressure-impregnated dry transformers with varnish-sealed windings for clean indoor service.
Worm gearboxes giving large reduction ratios in a single stage with smooth, quiet operation.
Slip-ring induction motors in a totally enclosed enclosure for dusty or damp heavy-duty applications.
Slip-ring (wound-rotor) induction motors in an open drip-proof enclosure, for loads needing high starting torque and controlled starting...
No products match your filters. or ask our engineers.