Borewell Submersible Pump
Multistage submersible pumps built to run inside narrow borewells for deep-water lifting.
On request- StandardIS 8034 (submersible pumpsets)

Download specification sheet (PDF)
Solid-handling non-clog pumps of the SHM / SHD series for liquids with large solids, slurries and sludge.
Every field is optional - tell us what you know and we will confirm the rest in the quotation.
Representative image. The actual product, make and appearance depend on the supplier and your specification.
Also searched as: SHM SHD non-clog pump, solid handling pump, slurry and sludge pump, trade effluent pump, SHM series pump, SHD series pump
Slurries and sludges behave differently from sewage. Concentration, particle size and abrasiveness drive wear, and thick mixtures lower the head and flow a pump produces compared with its water curve. Always state the percentage of solids and whether they are hard (grit, ash, scale) or soft (organic sludge).
For lighter solids duty, the SHL non-clog pump may be enough. If the pump will sit inside a pit, consider the NS submersible sewage pump. A slow, steady design usually lasts longer than a fast, compact one on abrasive service.
Ratings, dimensions and certification are confirmed against your enquiry. Use Send an enquiry and our engineers will respond within 24 hours.
Provide the percentage solids by weight, particle size and hardness, specific gravity of the mixture, temperature, flow, head and the piping layout. A sample description or lab analysis helps us judge viscosity and wear. Also say how the slurry is produced, because process changes can alter concentration.
Solids and higher viscosity increase internal friction, so the pump develops less head and flow and draws more power than on water. The effect grows with concentration and particle size. Selection should apply a correction rather than using the clear-water curve.
It depends on how abrasive the solids are, pump speed and operating hours, so there is no fixed interval. Keep spare wear rings and an impeller on hand and inspect on a schedule based on your own experience of the duty.
It is a pump built to pass liquids with large solids, slurries and sludge without blocking. It is used for sewage, trade effluent and similar duties where an ordinary pump would clog.
SHM and SHD are series of solid-handling non-clog pumps. They are horizontal pumps with an electric motor, coupled or monoblock, for sewage, slurries and trade effluent. Confirm the model from your duty.
Give the liquid type, size of the largest solid, percentage of solids, flow and total head. Also tell us the temperature and the nature of the solids, as these affect impeller type and materials.
Send the liquid, solid content and maximum solid size, flow, total head, temperature, power supply and installation conditions. Price depends on model, duty and quantity. Quotations are prepared from the details you send, so share your requirement and SKE Bharat will respond within 24 hours.
| Pump Type | Solid-handling, non-clog |
|---|---|
| Standard | To specification |
| Typical Service | Sewage, slurries, trade effluent |
| Orientation | Horizontal |
| Drive | Electric motor (coupled or monoblock) |
How gate, globe and non-return valves differ, where each belongs on a pump line, and how to choose size, rating and type to avoid water hammer…
7 min readPumps, Cables & Buying GuidesA practical method to select a centrifugal pump: define flow and total head, check NPSH, pick materials and seals, then size the motor.
7 min read