Medium Voltage Soft Starters
Medium Voltage Soft Starters

Download specification sheet (PDF)

Switchgear PanelsSKU SKE-SWG-015

Medium Voltage Soft Starters

Medium-voltage solid-state soft starters for smooth acceleration of large HV motors.

On request

Choose your specification

Every field is optional - tell us what you know and we will confirm the rest in the quotation.

WhatsApp

Representative image. The actual product, make and appearance depend on the supplier and your specification.

Overview

Also searched as: MV soft starter, medium voltage motor starter, high voltage motor soft starter, MV soft starter panel, HV motor soft starter, medium voltage soft start panel

Typical applications

  • Large pumps, fans and compressors
  • Crushers and conveyors
  • Weak-grid motor starting

Key features

  • Reduces starting current and mechanical shock
  • Bypass contactor option
  • Motor protection functions

Selection notes

A medium-voltage soft starter limits starting current and torque on a large HV motor, but it does not remove the need to check the supply. Begin with motor voltage, kW, full-load current and the load's starting torque curve; a pump with a closed valve needs far less than a loaded crusher.

  • Starting current target: agree the allowed voltage dip at the incomer with your DISCOM or plant study, then choose the current limit that meets it while the motor still reaches speed.
  • Bypass: a bypass contactor takes the thyristors out of circuit after run-up, cutting heat in the panel and extending life.
  • Protection: check that motor protection (overload, locked rotor, phase loss) is included or fed from a separate relay such as the motor protection relays.

Typical mistakes: sizing only by kW, ignoring frequent-start duty, and forgetting the ventilation needed in the panel room. If you also need speed control, compare with a drive or starter. Final selection should be confirmed with a qualified engineer using your motor datasheet.

To quote, please share

  • Single-line diagram and incomer / feeder schedule
  • System voltage, fault level (kA) and busbar rating
  • Switching devices and make preference
  • Indoor / outdoor, IP degree and ambient
  • Metering, protection and communication requirements

Ratings, dimensions and certification are confirmed against your enquiry. Use Send an enquiry and our engineers will respond within 24 hours.

Frequently asked questions

When is a soft starter better than direct-on-line starting for an HV motor?

When the starting current dips the supply voltage beyond what the grid, generator or other loads can tolerate, or when the mechanical shock of a full-voltage start damages couplings and belts. If the supply is strong and the load tolerates it, DOL with proper protection is simpler.

Does an MV soft starter replace a VFD?

No. A soft starter only ramps voltage during starting and then runs the motor at line speed. It cannot control speed or save energy on variable loads. Choose a VFD if the process needs speed regulation, and a soft starter if you only need a gentle start.

What is a medium voltage soft starter?

It is a solid-state starter for large high voltage motors, usually in the 3.3 kV to 11 kV range. It raises the voltage gradually at start, so the motor accelerates smoothly and the starting current and mechanical shock are reduced.

Why use a soft starter for an MV motor?

A direct on line start draws a very high current and puts stress on the motor, the coupling and the supply. A soft starter limits the starting current and torque and gives a smooth start of the driven equipment.

What is the difference between a soft starter and a variable frequency drive?

A soft starter only controls voltage during starting and stopping, and then the motor runs at full speed. A variable frequency drive changes the frequency and so controls the speed continuously during running as well.

What details are needed for an MV soft starter quotation?

Send the motor kW or HP, voltage, full load current, starting duty and load type, supply fault level, bypass and protection needs and make preference. Price depends on rating and make, so send details for a quotation.

Technical specification

Panel TypeMV soft starter panel
StandardIEC 60947-4-2 / IEC 62271
Voltage Class3.3 kV - 11 kV
ConstructionMetal-enclosed
Protection DegreeIP4X (typical)
Typical UseHV motor soft starting